LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> 85 Ventilation -- 992 - 911 CARRERA (992) >> WM, 851419 Removing And Installing Air Inlet Housing >> Installing Air Inlet Housing

Installing Air Inlet Housing

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten nuts for air inlet housing to >Tightening torque 3.2 Nm (2.1 ftlb.)  .

    Tighten screw for front diagonal brace to >Tightening torque 20 Nm  .

    Tighten screws for rear diagonal brace to >Tightening torque 8 Nm  .

scientia non olet · About LEMON Manuals