Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake disc thickness, front -Turbo S | Dimension | 40 mm | |||
| Thickness tolerance of brake disc | Maximum | Dimension | 0.01 mm | ||
| Lateral runout of wheel hub | Maximum | Dimension | 0.03 mm | ||
| Lateral runout of brake disc when installed | maximum | Dimension | 0.07 mm | ||
| Wheel driver pin to wheel hub (911 Turbo) | Cheese head bolts, M6 x 30/always use new bolts following removal | Tightening torque | 14 Nm (10.5 ftlb.) |