Removing Disc Brake Pads Front: Notes
WARNING: This page is about a different variant/trim than selected.
- Press back brake pistons.
- 1.1 > T10145 - Piston resetting appliance must be inserted between the disc brake pads.
- 1.2 Press brake pistons back slowly and evenly. Be careful of the dust boots on the brake pistons when doing this.
- Removing disc brake pads -1-
.
Disc brake pads in brake calliper
- 2.1 Fit a plastic wedge between the brake pads -1- and brake calliper -2- .
- 2.2 Carefully loosen the disc brake pads from the brake calliper by turning the tool slightly.
- 2.3 Unclip electric plug connection for brake pad wear indicator -4- and remove disc brake pads from pad retaining pins -3- .
- Clean the contact surfaces of the disc brake pads in the brake calliper and check the dust boots for damage/cracks.