Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Control arm to bracket | Hexagon-head bolt, M12 x 1.5 x 90 with hexagon nut/always replace following removal | Initial tightening | 70 Nm (51.6 ftlb.) | ||
| Control arm to bracket | Hexagon-head bolt, M12 x 1.5 x 90 with hexagon nut/always replace following removal | Final tightening | + 180° |