Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Tie-rod end to wheel bearing housing | Hex nut M12 x 1.5/always replace after removal | Tightening torque | 85 Nm (62.7 ftlb.) | ||
| Lower trailing arm cover to lower trailing arm | Internal hexagon roundhead bolt, M6 x 25 | Tightening torque | 10 Nm (7.5 ftlb.) |