Removing Control Unit For Fuel Pump
WARNING: This page is about a different variant/trim than selected.
Information
Make sure not to damage the electric lines.
- Unscrew fastening screws -1-
on the battery console -2-
.
Fattening Screws
- Carefully lift the battery console -2-
and turn it around until the electric plug connection for the fuel pump control unit is accessible.
Battery console
- Release and disconnect electric plug connection -1-
on control unit for fuel pump -2-
.
Fuel pump control unit
- Unscrew fastening nuts -3-
and remove control unit for fuel pump -2-
.
Fastening nuts