Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Oil line holder on cylinder head cover, bank 1-3 | Screw, M6 x 14 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Tank vent line holder to turbocharge. | Screw, M6 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Tank ventilation sensor to holder | Tightening torque | 10 Nm (7.5 ftlb.) |