Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Oil line to cylinder head | Screw, M6 x 12 - replace O-rings | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Holder for turbocharger lines | Screws, M6 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Oil lines (pressure side) to turbocharger | Screw, M6 x 10 - replace O-rings | Tightening torque | 10 Nm (7.5 ftlb.) |