Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Electronic adjuster to turbocharger |
Combination screw, M5 x 20 |
Tightening torque |
4.3 Nm (3.2 ftlb.) |
+/- 0.5 Nm (0.35 ftlb.) |
|
| Adjusting nut of pull rod to lever |
M6 nut |
Tightening torque |
6 Nm |
|
|