WM, 214119 Removing And Installing Pressure Pipe: Notes
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Pressure pipe to charge-air cooler | Screw, M6 | Tightening torque | 6 Nm (4.5 ftlb.) | - 0.3 Nm (0.2 ftlb.) | + 0.5 Nm (0.35 ftlb.) |
| Rubber shroud for throttle valve to pressure pipe | Screw-type clamp | Tightening torque | 5.5 Nm (4 ftlb.) | +/- 0.5 Nm (0.35 ftlb.) |