LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 44 (15 Engine - Cylinder Head, Valve Drive 3.8L (Eng Code MDK.H) -- 992 - 911 CARRERA (992)) >> WM, 158219 Remove And Install The Cylinder Head Cover >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine.

    >  WM, 100119 REMOVING AND INSTALLING ENGINE  .

  2. Remove transmission.

    >  WM, 343527 REMOVING AND MOUNTING TRANSMISSION  .

    >  WM, 373427 REMOVING AND MOUNTING DOUBLE CLUTCH TRANSMISSION  .

  3. Support the engine with > 9771 - engine adapter  , > 9771/1 - mounting set  and > 9771/2 - engine support  on the assembly support.

    >  WM, 1001IN TOOLS FOR REMOVING UNITS AND WORKING ON THE ASSEMBLY SUPPORT  .

  4. Drain engine oil.

    >  WM, 170117 DRAINING AND FILLING ENGINE OIL  .

  5. Remove exhaust system.

    >  WM, 260119 REMOVING AND INSTALLING EXHAUST SYSTEM  .

  6. Remove turbocharger.

    >  WM, 213019 REMOVING AND INSTALLING TURBOCHARGER 

  7. Remove ignition coils.

    >  WM, 282020 REMOVING AND INSTALLING IGNITION COILS 

  8. Remove fuel injectors.

    >  WM, 244019 REMOVING AND INSTALLING INJECTOR VALVE 

  9. Remove heat shields.

    >  WM, 261219 REMOVING AND INSTALLING HEAT SHIELD  .

  10. Remove actuators for camshaft control.

    > 153919 REMOVING AND INSTALLING ACTUATOR FOR CAMSHAFT CONTROL 

scientia non olet · About LEMON Manuals