Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Actuator for camshaft control to cylinder head | Aluminum screw, M6 x 14 - replace screw | Tightening torque | 5 Nm (3.5 ftlb.) | + 0.5 Nm (0.3 ftlb.) | |
| Heat protection shield for actuator on outlet side | M6 screw | Tightening torque | 10 Nm (7.5 ftlb.) |