LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 44 (15 Engine - Cylinder Head, Valve Drive 3.8L (Eng Code MDK.H) -- 992 - 911 CARRERA (992)) >> WM, 150520 Removing And Installing Camshafts (Includes Setting Timing) >> Tools

WM, 150520 Removing And Installing Camshafts (Includes Setting Timing): Tools

WARNING: This page is about a different variant/trim than selected.
Tool denomination Type Tool number Image
turning device Special tool > 9773
G15487483Courtesy of PORSCHE CARS NORTH AMERICA, INC.
locating pin Special tool > 9595/1
G15487484Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Open-ended wrench, a/f 39 Special tool > 9863/3
G15487485Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Socket wrench for camshaft Special tool > 9863
G15487486Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Torque wrench, 40-200 Nm (30-148 ftlb.) General service equipment > V.A.G 1332
G15487487Courtesy of PORSCHE CARS NORTH AMERICA, INC.
staking tool Special tool > 9772/1
G15487488Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Electronic torque wrench, 2 - 100 Nm (1.5 - 74 ftlb.) Special tool > 9768
G15487489Courtesy of PORSCHE CARS NORTH AMERICA, INC.