Remove Anti-Roll-Bar Mount

1. If the anti-roll bar is still to be used:  Mark the position of the opening of the anti-roll-bar bearing -1-  on the anti-roll bar. > Installation position marking for anti-roll bar bearing 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Installation position marking for anti-roll bar bearing

2. Dismantle anti-roll bar clamps -1-  (if necessary using a plastic hammer) and remove anti-roll-bar bearing -2-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Anti-roll bar clamps and anti-roll bar bearings.