Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Charge-air cooler to body | Screw, M6 x 35 -replace screw | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Rubber shroud for throttle valve to pressure pipe | Screw-type clamp | Tightening torque | 5.5 Nm (4 ftlb.) | +/- 0.5 Nm (0.35 ftlb.) | |
| Pressure hose to charge-air cooler | Screw-type clamp | Tightening torque | 5.5 Nm (4 ftlb.) | 0.5 Nm (0.3 ftlb.) |