Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Rubber shroud to throttle body |
Screw-type clamp |
Tightening torque |
3 Nm (2 ftlb.) |
|
|
| Pressure pipe to charge-air cooler |
Screw, M6 |
Tightening torque |
6 Nm (4.5 ftlb.) |
- 0.3 Nm (0.2 ftlb.) |
+ 0.5 Nm (0.35 ftlb.) |