Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Coolant lines to turbocharger |
Screw, M6 x 10 -replace O-rings |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Holder for turbocharger lines |
Screws, M6 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|