LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (10 Engine - Crankcase, Suspension 3.8L (Eng Code MDK.H) -- 992 - 911 CARRERA (992)) >> WM, 105219 Removing And Installing Positive Crankcase Ventilation Hose >> Installing Positive Crankcase Ventilation Hose

Installing Positive Crankcase Ventilation Hose

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order.

    Tightening torque for screws on holder on cylinder bank 1-3: > Tightening torque 10 Nm (7.5 ftlb.) 

    Tightening torque for screw on holder on cylinder bank 4-6: > Tightening torque 10 Nm (7.5 ftlb.) 

scientia non olet · About LEMON Manuals