LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (10 Engine - Crankcase, Suspension 3.0L (Eng Code MDK.KA) -- 992 - 911 CARRERA (992)) >> WM, 103519 Removing And Installing Engine Mount >> Removing Engine Mount >> Removing Engine Mounting

Removing Engine Mounting

WARNING: This page is about a different variant/trim than selected.

Information 

The procedure for removing and installing is described for one side as an example. The procedure for the other side is almost identical.

  1. Only for vehicles with PADM  :

    Release and disconnect cable plug -1-  .

    G15485391Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Cable plug for PADM engine mount

  2. Remove engine mount -2-  .

    Mark the position of the engine mount on both sides -arrow-  of the bodyshell.

    Unscrew screws -1-  and remove engine mount -2-  .

    G15485392Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Engine mount

scientia non olet · About LEMON Manuals