Preliminary Work
WARNING: This page is about a different variant/trim than selected.
- Remove the engine.
- Remove transmission.
> WM, 343527 REMOVING AND MOUNTING TRANSMISSION
> WM, 373427 REMOVING AND MOUNTING DOUBLE CLUTCH TRANSMISSION
- Support the engine with > 9771 - engine adapter
, > 9771/1 - mounting set
and > 9771/2 - engine support
on the assembly support.
1001IN TOOLS FOR REMOVING UNITS AND WORKING ON THE ENGINE ASSEMBLY SUPPORT
- Drain engine oil.
- Remove exhaust system.
- Remove turbocharger.
- Remove ignition coils.
- Remove fuel injectors.
- Remove heat shields.
- Remove actuators for camshaft control.
> 153919 REMOVING AND INSTALLING ACTUATOR FOR CAMSHAFT CONTROL