LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (15 Engine - Cylinder Head, Valve Drive 3.8L (Eng Code MDK.E) -- 992 - 911 CARRERA (992)) >> WM, 155519 Removing And Installing Hydraulic Valve For Valve Lift Adjustment >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
WARNING: Vehicle can fall down 
  • Risk of squashing or crushing 
  • Risk of damage to the vehicle 

    → Do not place any solid objects under the raised vehicle.

    → Ensure that the lifting platform is prevented from lowering.

    → Remove solid objects before lowering the vehicle.

    → Raise the vehicle only at the jacking points provided.

    → The outer jacking points should be used primarily.

  1. Lift the vehicle at the specified jacking points.

    >  WM, 4X00IN LIFTING THE VEHICLE