Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Heat shield to body |
Speed nut |
Tightening torque |
2.5 Nm (1.75 ftlb.) |
|
|
| Screw securing engine mount to body |
M8 x 50/replace |
Initial tightening |
16 Nm (12 ftlb.) |
|
|
| Screw securing engine mount to body |
M8 x 50/replace |
Final tightening |
+ 30° |
|
|