Preliminary Work
WARNING: This page is about a different variant/trim than selected.
- Start the engine and let it heat up (warm to touch).WARNING: Vehicle can fall down
- Risk of squashing or crushing
- Risk of damage to the vehicle
→ Do not place any solid objects under the raised vehicle.
→ Ensure that the lifting platform is prevented from lowering.
→ Remove solid objects before lowering the vehicle.
→ Raise the vehicle only at the jacking points provided.
→ The outer jacking points should be used primarily.
- Raise the vehicle.
- Remove rear wheels.
440519 REMOVING AND INSTALLING WHEEL
440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT
CAUTION: Hot components- Risk of burns
→ Wear personal protective gear.
- Risk of burns
- Remove rear silencers.
- Remove heat shield on the engine carrier.
261419 REMOVING AND INSTALLING HEAT SHIELD ON ENGINE CARRIER
- Remove upper part of heat shield.
- Remove ignition coil.
- Remove spark plugs.