Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Control arm to lower trailing arm | Hexagon-head bolt, M14 x 1.5 x 95 and hexagon nut | Tightening torque | 160 Nm (118 ftlb.) | ||
| Control arm with front axle cross member (front section) to body | Hexagon head bolt, M12 x 1.5 x 105/always replace following removal | Initial tightening | 70 Nm (52 ftlb.) | ||
| Control arm with front axle cross member (front section) to body | Hexagon head bolt M12 x 1.5 x 105/always replace following removal | Final tightening | + 180° | ||
| Lower trailing arm cover to lower trailing arm | Internal hexagon roundhead bolt, M6 x 25 | Tightening torque | 10 Nm (7.5 ftlb.) |