Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| vibration damper on crankshaft | external Torx, M8 x 1 x 25 -replace screws | initial tightening | 3 Nm | ||
| vibration damper on crankshaft | external Torx, M8 x 1 x 25 - replace screws | initial tightening | 8 Nm | ||
| vibration damper on crankshaft | external Torx | Torque angle | 90° |