LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (13 Engine - Crank Drive, Pistons 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 137519 Removing And Installing Crankshaft Vibration Damper >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Hot components 
  • Risk of burns 

    → Let hot components cool down.

    → Wear personal protective gear.

  1. Remove belt drive heat shield.

    261419 REMOVING AND INSTALLING HEAT SHIELD (ON BELT DRIVE) - section on "Removing"

  2. Loosen belt tensioner drive belt and remove it from the vibration damper.
scientia non olet · About LEMON Manuals