LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (13 Engine - Crank Drive, Pistons 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 135955 Replacing Crankshaft Sealing Ring - Flywheel Side >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removing and installing flywheel 
  • Leaks 
  • Risk of damage to the flywheel and adjacent components 

    → Be very careful during removal and installation.

    → See Technical Information releases about the flywheel.

Manual transmission: 

  1. Install flywheel.

    136019 REMOVING AND INSTALLING FLYWHEEL 

    Information 

    Loosen and tighten screws on the component according to specifications.

  2. Install the clutch.

    Refer to WM, 305019 REMOVING AND INSTALLING CLUTCH

  3. Install transmission.

    Refer to WM, 343519 REMOVING AND INSTALLING TRANSMISSION

    Porsche Doppelkupplung (PDK): 

  4. Install flywheel.

    136019 REMOVING AND INSTALLING FLYWHEEL - PORSCHE DOPPELKUPPLUNG (PDK) 

  5. Install double clutch transmission.

    Refer to WM, 373419 REMOVING AND INSTALLING PORSCHE DOUBLE-CLUTCH TRANSMISSION