LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (13 Engine - Crank Drive, Pistons 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 135955 Replacing Crankshaft Sealing Ring - Flywheel Side >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removing and installing flywheel 
  • Leaks 
  • Risk of damage to the flywheel and adjacent components 

    → Be very careful during removal and installation.

    → See Technical Information releases about the flywheel.

Information 

Loosen and tighten screws on the component according to specifications.

  1. Remove transmission.

    Refer to WM, 343519 REMOVING AND INSTALLING TRANSMISSION

    Refer to WM, 373419 REMOVING AND INSTALLING PORSCHE DOUBLE-CLUTCH TRANSMISSION

    Manual transmission: 

  2. Remove the clutch.

    Refer to WM, 305019 REMOVING AND INSTALLING CLUTCH

  3. Remove flywheel.

    136019 REMOVING AND INSTALLING FLYWHEEL 

    Porsche Doppelkupplung (PDK): 

  4. Remove flywheel.

    136019 REMOVING AND INSTALLING FLYWHEEL - PORSCHE DOPPELKUPPLUNG (PDK)