Technical Values
WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic values | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connecting rod bolt: Step 1 | M10 x 1.25 x 51 | Initial tightening | 5 Nm (3.5 ftlb.) | ||
| Connecting rod bolt: Step 2 | M10 x 1.25 x 51 | Subsequent tightening torque | 16 Nm (12 ftlb.) | ||
| Connecting rod bolt: Step 3 | M10 x 1.25 x 51 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Connecting rod bolt: Step 4 | M10 x 1.25 x 51 | Torque angle | + 80° | ||
| Connecting rod bolt: Step 5 | M10 x 1.25 x 51 | Loosen screws | - 360° | ||
| Connecting rod bolt: Step 6 | M10 x 1.25 x 51 | Initial tightening | 5 Nm (3.5 ftlb.) | ||
| Connecting rod bolt: Step 7 | M10 x 1.25 x 51 | Subsequent tightening torque | 16 Nm (12 ftlb.) | ||
| Connecting rod bolt: Step 8 | M10 x 1.25 x 51 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Connecting rod bolt: Step 9 | M10 x 1.25 x 51 | Torque angle | + 80° | +/- 3° |