Technical Values
WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic values | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Wheel hub must be replaced | Prerequisite: The central bolt was originally tightened to the prescribed tightening torque and the vehicle has since been driven. | Loosening torque less than | 400 Nm (296 ftlb.) | ||
| Normal contact pattern on wheel hub | On vehicles with low mileage, the contact pattern may not be continuous | Minimum contact pattern width | 10 mm | ||
| Normal contact pattern on cone ring on central bolt | Contact pattern forms only after a certain mileage | Contact pattern width: approx. | 10 mm | + 5 mm | |
| Normal contact pattern on wheel cone | Contact pattern forms only after a certain mileage | Contact pattern width | 10 mm | + 5 mm |