Technical Values
WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Wheel to wheel hub/central bolts | All contact surfaces of the wheel, wheel hub and brake disc as well as the trapezoidal thread in the wheel hub must be free of abrasion, sand, dust or chips. | Step 1 | 600 Nm (444 ftlb.) | ||
| Wheel to wheel hub/central bolts | All contact surfaces of the wheel, wheel hub and brake disc as well as the trapezoidal thread in the wheel hub must be free of abrasion, sand, dust or chips. | Step 2: Loosen central bolt | -90° | ||
| Wheel to wheel hub/central bolts | All contact surfaces of the wheel, wheel hub and brake disc as well as the trapezoidal thread in the wheel hub must be free of abrasion, sand, dust or chips. | Step 3 | 600 Nm (444 ftlb.) | ||
| Wheel to wheel hub/central bolt (emergency tightening only!) | Applies only to tightening in the event of a breakdown | Tightening torque | 100 Nm (74 ftlb.) |