Installing Rear Wheel Bearing
WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
The pictures shown in this document may differ from the original.
- Install wheel bearing -1
.
Wheel bearing mounting
- 1.1 Position wheel bearing -1- .
- 1.2 Fit new
screws -2-
and tighten crosswise.
For 992 basic system:
> Initial tightening 80 Nm (59 ftlb.)
> Final tightening torque angle + 120°
For 992 GT3:
> Tightening torque 80 Nm (60 ftlb.)
> Final tightening angle + 120°