LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (42 Rear Wheel Suspension Drive Shaft 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 422119 Removing And Installing Drive Shaft >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear brake disc air guide.

    46161911 REMOVING AND INSTALLING BRAKE DISC AIR GUIDE (REAR) - on "Installing"

    46161921 REMOVING AND INSTALLING BRAKE DISC AIR GUIDE (REAR) - on "Installing"

    461619 REMOVING AND INSTALLING PCCB BRAKE DISC AIR GUIDE (REAR) - on "Installing"

  2. Install strut or support plate.

    Refer to the appropriate service information.

    > 421419 REMOVING AND INSTALLING SUPPORT PLATE  - on "Installing"

  3. Install cover for rear underbody.

    Refer to the appropriate service information.

  4. Fit rear wheel.

    440519 REMOVING AND INSTALLING WHEEL - on "Installing"

    440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT - on "Installing"