Technical Values
WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Lower trailing arm to wheel bearing housing | Hexagon-head bolt, M12 x 1.5 x 105 with hexagon nut/always replace following removal | Initial tightening | 70 Nm (51.6 ftlb.) | ||
| Lower trailing arm to wheel bearing housing | Hexagon-head bolt, M12 x 1.5 x 105 with hexagon nut/always replace following removal | Final tightening | + 180° | ||
| Lower trailing arm to rear axle carrier (camber eccentric adjuster) | Eccentric screw, M12 x 1.5 x 97 with eccentric washer and hexagon nut | Tightening torque | 100 Nm (73.8 ftlb.) |