LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (19 - Engine - Cooling 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 196819 Removing And Installing Directional-Control Valve For Thermal Management >> Installing Directional-Control Valve For Thermal Management

Installing Directional-Control Valve For Thermal Management

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.

    Check O-ring and replace it if damaged.

    Tightening torque for directional-control valve screws:

    > Tightening torque 10 Nm (7.5 ftlb.) 

scientia non olet · About LEMON Manuals