LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (19 - Engine - Cooling 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 195019 Removing And Installing Coolant Pump >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Hot components 
  • Risk of burns 

    → Let hot components cool down.

    → Wear personal protective gear.

WARNING: Hot fluid 
  • Danger of scalding 

    → Let the fluid cool down.

    → Wear personal protective gear.

  1. Drain coolant from the engine.

    193817 DRAINING AND FILLING COOLANT  - section on "Draining"

  2. Remove rear silencers.

    263319 REMOVING AND INSTALLING REAR SILENCER - section on "Removing"

  3. Remove heat shield on belt drive.

    261419 REMOVING AND INSTALLING HEAT SHIELD (ON BELT DRIVE) - section on "Removing"

  4. Release drive belt.

    137801 CHECKING DRIVE BELT