LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (19 - Engine - Cooling 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 194519 Removing And Installing Additional Coolant Pump >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install left front-axle support at the front.

    400819 REMOVING AND INSTALLING FRONT-AXLE SUPPORT - section on "Installing"

  2. Fill up coolant.

    193817 DRAINING AND FILLING COOLANT  - section on "Filling"

  3. Bleed the cooling system and visually check for leaks.

    190107 BLEEDING THE COOLING SYSTEM  - section on "Bleeding"

  4. Install wheel housing liner.

    Refer to the appropriate service information.

  5. Install left front wheel.

    440519 REMOVING AND INSTALLING WHEEL - section on "Installing"

scientia non olet · About LEMON Manuals