LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (19 - Engine - Cooling 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 193519 Removing And Installing Cooling-Air Flaps >> Installing Cooling-Air Flaps

Installing Cooling-Air Flaps

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws securing cooling-air flaps to retaining frame.

    > Tightening torque 2.5 Nm (1.75 ftlb.) 

scientia non olet · About LEMON Manuals