LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (46 Brakes - Brake Mechanism 3.0L (Eng Code MDK.H) -- 992 - 911 CARRERA (992)) >> WM, 468320 Removing And Installing Brake Shoes >> Installing Brake Shoes

Installing Brake Shoes

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Preloaded or pressurized components 
  • Risk of injury (e.g. crushing or bruising) when removing and installing springs. 
    • Do not reach into the danger area.
    • Relieve the tension on components before starting work.
    • Secure components to prevent them from loosening suddenly.
    • Wear protective gloves and goggles.
    • Be very careful when working on the brake system.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Set installation position according to the markings made during removal.
    2. 1.2  Centre the brake shoes following installation.
scientia non olet · About LEMON Manuals