LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (20 Fuel Supply, Actuator 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 201719 Removing And Installing Purge-Air Line >> Subsequent Work >> Subsequent Work (Front Section)

Subsequent Work (Front Section)

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front-axle support.

    400819 REMOVING AND INSTALLING FRONT-AXLE SUPPORT

  2. Install rear tunnel reinforcement.

    Refer to the appropriate service information.

  3. Install covers for front, center and rear underbody.

    Refer to the appropriate service information.

  4. Install battery console.

    Refer to the appropriate service information.

  5. Remove protective covers and warning sign.

Subsequent work (rear section) 

  1. Install engine.

    100119 REMOVING AND INSTALLING ENGINE

  2. Remove protective covers and warning sign.