Installing Low-Pressure Sensor
WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Install low-pressure sensor.
To tighten the sensor, counterhold at the square section -3- of the fuel line using an open-ended wrench.
Screw in and tighten low-pressure sensor -2- .
- 1.1 > Tightening torque 25 Nm (19 ftlb.)
- 1.2 Connect the cable plug -1- and check that it is seated securely.
Low-pressure sensor on fuel line