Subsequent Work
WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Complete the vehicle.
- PIWIS Tester
can now be connected.
Information
- There is no need to create a Vehicle Analysis Log (VAL).
Follow the instructions on the Tester!
- Select DME
in the control unit search screen.
- 3.1 Switch to the Drive links/checks menu item.
- 3.2 Select the Drain tank function.
- 3.3 Activate the Drain tank
function by pressing F8=Start.
This takes 30 seconds!
- 3.4 Deactivate by pressing F8=Stop.
- Use the PIWIS Tester
to bleed the high-pressure system using the function.
Refer to the appropriate Fuel System service information
- Perform a test drive.