LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (40 Wheel Suspension Front Drive Shaft 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 407719 Removing And Installing Front Anti-Roll Bar >> Removing Anti-Roll Bar

Removing Anti-Roll Bar

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unclip holder for coolant lines -1-  from the anti-roll bar clamp -2-  .
    G15527160Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Coolant line holders

  2. Remove anti-roll bar -1-  from the front-axle cross member.
    G15527161Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Securing anti-roll bar

    1. 2.1  Remove screws -2-  .