Technical Values
WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Front drive shaft to wheel hub | Item 4: Lock nut, M22 x 1.5/replace following removal | Initial tightening | 250 Nm (184.4 ftlb.) | ||
| Front drive shaft to wheel hub | Item 4: Lock nut, M22 x 1.5/replace following removal | Final tightening | + 60° | ||
| Screws for front drive shaft - 992 Dakar | Maintenance point: Tighten MM8 x 45 drive shaft screws. | Test torque | 25 Nm (18.4 ftlb.) | ||
| Screws for rear drive shaft - 992 Dakar | Maintenance point: Tighten MM8 x 45 drive shaft screws. | Test torque | 70 Nm (51.6 ftlb.) |