LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (40 Wheel Suspension Front Drive Shaft 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 400919 Removing And Installing Front-Axle Cross Member >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain coolant.

    193817 DRAINING AND FILLING COOLANT

  2. Remove (front) brake-disc air guide on both sides of the vehicle.

    461619 REMOVING AND INSTALLING REAR BRAKE-DISC AIR GUIDE - article on "Removing"

  3. Remove front wheel housing liner (front section) on both sides of the vehicle.

    >  WM, 50561901 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER (FRONT SECTION) 

  4. Remove front-axle support.

    > 400819 REMOVING AND INSTALLING FRONT-AXLE SUPPORT