Installation Position
WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
When removing the front-axle cross member, always pay particular attention to the following:
- The front section -1- must not be separated from the rear section -2- when installed.
- The front-axle cross member must only be replaced as a complete component. Replacing the individual sections -1 or 2- is not permitted.
Installation position
| 1 | Front-axle cross member (front section) |
| 2 | Front-axle cross member (rear section) |