LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (10 Engine - Crankcase, Suspension 3.0L (Eng Code MDK.Kb) -- 992 - 911 CARRERA (992)) >> WM, 105519 Removing And Installing Oil Separator >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear lid.
  2. Cabriolet vehicles:  Move convertible top into service position.

    Refer to the appropriate service information.

  3. Remove charge air cooler.

    214319 REMOVING AND INSTALLING CHARGE-AIR COOLER

    WARNING: Danger of objects or loads falling down 
    • Risk of squashing or crushing 

      → Secure components to prevent them from falling down.

    Information 

    • When lowering, the engine must not rest on the rear axle cross member. 

      Information 

    • It may only be supported over a large area at the oil pan. 
    • Localized loading is not permitted. 
  4. Remove intake-air distributor, side 4-6.

    244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOROil separator on bracket