Technical Values
WARNING: This page is about a different car, the 2024 Porsche 911, 2023 Porsche 911, and 2022 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw securing engine mount to body | M8 x 50/replace | Initial tightening | 16 Nm (12 ftlb.) | ||
| Screw securing engine mount to body | M8 x 50/replace | Final tightening | + 30° | ||
| Heat shield to rear bracket | Tapping screw | Tightening torque | 2.5 Nm (1.75 ftlb.) |