Preliminary Work

WARNING: Highly inflammable or explosive materials

Danger of fire or explosion
→ Avoid contact with hot parts or sources of ignition.

→ Use suction to remove ignitable vapours.

→ Attach warning sign in a clearly visible position.

→ Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.

→ Secure collection containers/vessels to prevent them from tipping over.

Information

The position of the fuse for the fuel pump can be found in the current Porsche After Sales vehicle electrical system documentation (PAB) fuse assignment.
> PPN > Porsche After Sales vehicle electrical system documentation (PAB)

Relieve fuel pressure in the system.
Pull out fuse for fuel pump.

See information about the position!

Start the engine and wait until it cuts out.

Re-insert fuse for fuel pump.
Remove intake-air distributor, side 4-6.
244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR - on "Removing"