LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 15 Engine - Cylinder Head, Valve Drive 3.0L (Eng Code MDK.Ca) -- 992 - 911 CARRERA (992) >> WM, 155519 Removing And Installing Hydraulic Valve For Valve Lift Adjustment >> Installing Hydraulic Valve For Valve Lift Adjustment

Installing Hydraulic Valve For Valve Lift Adjustment

  1. Coat new O-ring on the valve with new engine oil.
  2. Install valve -1-  with new O-ring.

    Fit valve.

    Fit and tighten screws -3  -.

    > Tightening torque 8 Nm (6 ftlb.) 

    Connect cable plug -2-  .

    G15484793Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Valve for valve lift adjustment

  3. Cylinder bank 4-6: 

    Unclip coolant line -1-  at holder -2-  .

    G15484794Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Coolant line on turbocharger

scientia non olet · About LEMON Manuals